Chapter 12: Alarm Management and Troubleshooting
To add a MEG:
1.
Select Ethernet > Protocols > SOAM > MA/MEG. The SOAM MA/MEG page opens.
Figure 413 SOAM MA/MEG Page
2.
Click Add MEG. The SOAM MA/MEG – Add page opens.
Figure 414 SOAM MA/MEG – Add Page
3.
Configure the fields described in
4.
Click Apply, then Close.
To edit a MEG, select the MEG and click Edit. The SOAM MA/MEG – Edit page opens. Only the CCM Inteval and
MIP Creation fields can be edited.
Table 124
describes the status (read-only) fields in the SOAM MA/MEG Component table.
Table
123.
phn-3965_006v002
Page 12-27
Performing Diagnostics