Configuring Unit Parameters - Cambium Networks PTP 820 Series User Manual

Chapter 4: Unit Management

Configuring Unit Parameters

To view and configure system information:
1. Select Platform > Management > Unit Parameters. The Unit Parameters page opens.
Table 41 describes the fields in the Unit Parameters page.
Figure 150 Unit Parameters Page
Table 41 Unit Parameters
Parameter
Name
Description
System up time
Contact person
Location
Longitude
Definition
A name for the unit (optional). This name appears at the top of every
Web EMS page.
Descriptive information about the unit. This information is used for
debugging, and should include information such as the chassis type.
The time since the system was last reinitialized.
The name of the person to be contacted if and when a problem with the
system occurs (optional).
The actual physical location of the node or agent (optional).
The unit's longitude coordinates.
phn-3965_006v002
Page 4-35
Configuring Unit Parameters