Cambium Networks PTP 820 Series User Manual page 528

Chapter 9: TDM Services and Interfaces
Figure 302 Native TDM Service Creation – Interface #1 (Radio/Cascading)
2 In the Slot/Group/Port field, select a radio interface, Radio Protection group, Multi-Carrier ABC group, or
cascading interface.
Note
Some interfaces may not appear in the Slot/Group/Port field. Refer to
Endpoints for the possible reasons an interface will not appear. If there are no available interfaces, a
message appears that no endpoint can be selected.
3 In the VC field, select the VC you want to classify to the endpoint (1-512).
4 Click Next. The Interface #2 page opens. In the Interface #2, configure the parameters of the trail's second
endpoint.
Figure 303 Native TDM Service Creation – Interface #2 (Radio/Cascading)
5 Follow the instructions in Steps 2-3 to configure the second endpoint.
6 Click Next. The Trail Selection page opens.
phn-3965_006v002
Page 9-20
Configuring Native TDM Trails
Limitations on Available