Cambium Networks PTP 820 Series User Manual page 77

Chapter 1: Introduction
Sub-Menus
Management > Unit Parameters
Management > NTP Configuration
Management > Time Services
Management > Interface Manager
Management > Inventory
Management > Unit Info
Management > Reset
Management > Set to Factory Default
Management > External Alarms > External Alarms
Input
Management > External Alarms > External Alarms
Output
Management > Networking > Local
Management > Networking > Remote
Management > SNMP > SNMP Parameters
Management > SNMP > Trap Managers
Management > SNMP > V3 Users
Software > Timer Parameters
Software > Versions
Software > Download & Install
Configuration > Timer Parameters
Configuration > Backup Files
Configuration > Configuration Management
Activation Key > Activation Key Configuration
Activation Key > Activation Key Overview
Security > General > Configuration
Security > General > Security Log Upload
Security > General > Configuration Log Upload
Security > X.509 Certificate > CSR
Reference Guide to Web EMS Menu Structure
For Further Information
Configuring Unit
Configuring NTP
Setting the Time and Date (Optional)
Enabling the Interfaces (Interface Manager)
Displaying Unit Inventory
Uploading Unit Info
Performing a Hard (Cold) Reset
Setting the Unit to the Factory Default Configuration
Configuring External Alarms
Configuring External Alarms
Changing the Management IP Address
Defining the IP Protocol Version for Initiating
Communications
Configuring the Remote Unit's IP Address
Configuration SNMP
Configuring Trap Managers
Configuration SNMP
Configuring a Timed Installation
Viewing Current Software Versions
Downloading and Installing Software
Reserved for future use.
Viewing Current Backup Files
Backing Up and Restoring Configurations
Configuring the Activation
Displaying a List of Activation-Key-Enabled Features
Operating in FIPS Mode
Uploading the Security Log
Uploading the Configuration Log
Configuring X.509 CSR Certificates and HTTPS
phn-3965_006v002
Page 1-31
Parameters.
Key.