Cambium Networks PTP 820 Series User Manual page 946

Chapter 20: Ethernet Protocols (CLI)
Parameter Input Type
interface Variable
slot Number
port Number
group Variable
cist-port- Number
priority
cist-port-path- Number
cost
cist-port- Variable
edge-port
Permitted Values Description
eth Enter the type of interface:
radio
eth – Ethernet
pwe
radio
pwe – TDM
1
ethernet: 1-6 The interface you want to configure.
radio: 1-2
management: 1-2
tdm: 1
rp1 To configure or display parameters for a
rp2 LAG group, or a Multi-Carrier ABC group,
rp3 use this parameter instead of the interface,
rp4 slot, and port parameters to identify the
lag1 group. See:
lag2
•
Configuring HSB Radio Protection (CLI)
lag3
•
Configuring Link Aggregation (LAG) and
lag4
LACP
mc-abc1
•
Configuring Multi-Carrier ABC (CLI)
mc-abc2
mc-abc3
mc-abc4
0-240, in multiples The priority contained in the first octet of
of 16. the two-octet Port ID.
1-200000000. The configurable assigned value for the
contribution of this port to the path cost of
paths towards the spanning tree root.
Note:
parameter is considered to be a topology
change by the MSTP mechanism.
true
true
false in the CIST.
false
port in the CIST.
phn-3965_006v002
Page 20-23
– Radio
(CLI)
Changing the value of this
– The port is considered an edge port
– The port is considered a non-edge
Configuring MSTP (CLI)