Cambium Networks PTP 820 Series User Manual page 703

Split-mount system
Hide thumbs Also See for PTP 820 Series:
Table of Contents

Advertisement

Chapter 14: Getting Started (CLI)
Table 128 IP Address (IPv6) CLI Parameters
Parameter
Input Type
Eight groups of four
ipv6-address
hexadecimal digits
separated by colons.
prefix-length
Number.
gateway
Eight groups of four
hexadecimal digits
separated by colons.
Examples
The following command sets the following parameters:
IPv4 Address - 192.168.1.160
Subnet Mask – 255.255.0.0
Default Gateway – 192.168.1.100
root> platform management ip set ipv4-address 192.168.1.160 subnet
255.255.0.0 gateway 192.168.1.100
The following command sets the following parameters:
IPv6 Address - FE80:0000:0000:0000:0202:B3FF:FE1E:8329
Prefix length – 64
Default Gateway - FE80:0000:0000:0000:0202:B3FF:FE1E:8329
root> platform management ip set ipv6-address
FE80:0000:0000:0000:0202:B3FF:FE1E:8329 prefix-length 64 gateway
FE80:0000:0000:0000:0202:B3FF:FE1E:8329
Permitted Values
Any valid IPv6 address.
1-128
Any valid IPv6 address.
phn-3965_006v002
Page 14-8
Changing the Management IP Address (CLI)
Description
The IP address for the
unit.
The prefix-length for the
unit.
The default gateway for
the unit (optional).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptp 820fPtp 820g

Table of Contents