Cambium Networks PTP 820 Series User Manual page 81

Chapter 1: Introduction
The following command enters radio view for fixed radio interface 2:
The following prompt appears:
The following command enters radio view for an RMC in expansion slot 3:
The following prompt appears:
Muting and Unmuting the Radio (CLI)
To mute or unmute the radio, enter the following command in radio view:
To configure a timed mute, enter the following command in radio view:
When the timer expires, the radio is automatically unmuted. A timed mute provides a fail-safe
mechanism for maintenance operations that eliminates the possibility of accidently leaving
the radio muted after the maintenance has been completed. By default, the timer is 10
minutes.
To display the mute status of a radio, enter the following command in radio view:
Table 21: Radio Mute/Unmute CLI Parameters
The following command mutes fixed radio interface 1:
radio[1/1]>
root> radio slot 1 port 2
radio[1/2]>
root> radio slot 3 port 1
radio[3/1]>
radio[x/x]>rf mute set admin <admin>
radio[x/x]> rf mute set admin on-with-timer timeout-value <1-
1440>
Note: In contrast to an ordinary mute, a timed mute is not persistent. This means
that if the unit is reset, the radio is not muted when the unit comes back online, even
if the timer had not expired. Also, in unit and radio protection configurations, a timed
mute is not copied to the mate unit or radio, and no mismatch alarm is raised if a
timed mute is configured on only one radio in the protection pair.
radio[x/x]>rf mute show status
Para In
met pu
er t
Ty
pe
adm Va
in ria
bl
e
radio[1/1]>rf mute set admin on
phn-3965_006v002
Page 1-35
Reference Guide to Web EMS Menu Structure
Per Description
mit
ted
Val
ues
on Mutes (on) or unmutes
off (off) the radio.