Cambium Networks PTP 820 Series User Manual page 282

Chapter 4: Unit Management
Note
The SNMP MIB Version field displays the current SNMP MIB version the unit is using.
6. In the V1V2 Blocked field, select Yes if you want to block SNMPv1 and SNMPv2 access so that only SNMPv3
access will be enabled.
7. Click Apply.
If you are using SNMPv3, you must also configure SNMPv3 users. SNMPv3 security parameters are configured per
SNMPv3 user.
To add an SNMP user:
1. Select Platform > Management SNMP > V3 Users. The V3 Users page opens.
Figure 130 V3 Users Page
2. Click Add. The V3 Users - Add page opens.
phn-3965_006v002
Page 4-7
Configuration SNMP