Cambium Networks PTP 820 Series User Manual page 898

Chapter 19: Quality of Service (QoS) (CLI)
The new profile has the following parameters:
•
profile-id – 2
•
green-min-threshold – 8000 Kbytes
•
green-max-threshold – 8000 Kbytes
•
green-max-drop – 100%
•
yellow-min-threshold – 8000 Kbytes
•
yellow-max-threshold – 8000 Kbytes
•
yellow-max-drop – 100%
The following command edits the WRED profile created by the previous command:
root> ethernet qos wred-profile-tbl edit profile-id 2 green-min-threshold
8000 green-max-threshold 8000 green-max-drop 100 yellow-min-threshold
4000 yellow-max-threshold 4000 yellow-max-drop 100
The edited profile has the following parameters:
•
green-min-threshold – 8000 Kbytes
•
green-max-threshold – 8000 Kbytes
•
green-max-drop – 100%
•
yellow-min-threshold – 4000 Kbytes
•
yellow-max-threshold –4000 Kbytes
•
yellow-max-drop – 100%
Assigning a WRED Profile to a Queue (CLI)
To assign a WRED profile to a queue, go to interface view for the interface and enter the following command:
eth type eth [x/x]> wred set service-bundle-id <service-bundle-id> cos
<cos> profile-id <profile-id>
To display the WRED profile assigned to a queue, go to interface view for the interface and enter the following
command:
eth type eth [x/x]> wred show profile-id service-bundle-id <service-
bundle-id> cos <cos>
Table 240 Assigning WRED Profile to Queue CLI Parameters
Parameter Input Type
service- Number
bundle-id
cos Number
profile-id Number
Permitted Values Description
1 – 63 Assigns the WRED profile to a Service
Bundle. Service Bundles are bundles of
Note: In the
queues, grouped together in order to
current release, only
configure common egress characteristics
Service Bundle 1 is
for specific services.
supported.
0 – 7 Assigns the WRED profile to a queue in
the designated service bundle.
1 – 32 A unique ID that identifies the profile.
phn-3965_006v002
Page 19-31
Configuring WRED (CLI)