Chapter 7: Quality of Service (QoS)
Figure 221 DSCP Classification - Edit Page
3.
Modify the parameters you want to change:
o
DSCP – Read-only. The DSCP value to be mapped.
o
Binary – Read-only. The binary representation of the DSCP value.
o
Description – Read-only. The description of the DSCP value.
o
CoS – The CoS assigned to frames with the designated DSCP value.
o
Color – The Color assigned to frames with the designated DSCP value.
4.
Click Apply, then Close.
phn-3965_006v002
Page 7-11
Configuring Classification