Cambium Networks PTP 820 Series User Manual page 530

Chapter 9: TDM Services and Interfaces
Figure 305 Native TDM Service Creation – Selection Summary (Radio/Cascading)
10 To create the trail with the displayed parameters, click Submit. If you want to return to an earlier page and
change the trail parameters, click Back.
Note
An invalid configuration error may occur in the event that another user utilized a resource that you
selected, such as an interface or a Trail ID, between the time you selected the resource and the time
you pressed Submit. If this occurs, you must go back and, if necessary, select alternative resources
for the trail.
Editing TDM Trails
To edit an existing trail:
1 Select the trail in the Native TDM Services page
2 Click Edit. The Native TDM Services – Edit page opens.
(Figure 294)j.
phn-3965_006v002
Page 9-22
Configuring Native TDM Trails