Cambium Networks PTP 820 Series User Manual page 453

Chapter 7: Quality of Service (QoS)
Figure 249 Scheduler WFQ Profile – Add Page
3. In the Profile ID field, select a unique Profile ID between 2 and 7. Profile ID 1 is used for a pre-defined WFQ
profile.
4. For each CoS value, enter the weight for that CoS, from 1 to 20.
5. Click Apply, then Close.
Editing a WFQ Priority Profile
To edit a scheduler WFQ profile:
1. Select Ethernet > QoS > Scheduler > WFQ Profiles. The Scheduler WFQ Profile page opens
2. Select the profile you want to edit and click Edit. The Scheduler WFQ Profile – Edit page opens. This page is
similar to the Scheduler WFQ Profile – Add page
ID.
3. Modify the profile.
4. Click Apply, then Close.
Deleting a WFQ Profile
To delete a scheduler WFQ profile, select the profile in the Scheduler WFQ Profiles page
Delete. The profile is deleted.
To delete multiple scheduler WFQ profiles:
1. Select the profiles in the Scheduler WFQ Profiles page or select all the profiles by selecting the check box in
the top row.
2. Click Delete. The profiles are deleted.
(Figure 249). You can edit any parameter except the Profile
phn-3965_006v002
Page 7-42
Configuring Scheduling
(Figure 248).
(Figure 248) and click