Chapter 10: Synchronization
4.
Select Sync > 1588 > Boundary Clock > Port Parameters. The 1588 Boundary Clock – Port Parameters page
opens. You can configure up to four interfaces per unit to be part of the Boundary Clock node. These
interfaces can be radio and Ethernet interfaces, but not TDM interfaces or groups (e.g., LAG or Multi-Carrier
ABC groups).
Figure 350 1588 Boundary Clock – Port Parameters Page
5.
Select an interface and click Edit. The 1588 Boundary Clock – Port Parameters – Edit page opens.
phn-3965_006v002
Page 10-13
Configuring 1588 Boundary Clock