Cambium Networks PTP 820 Series User Manual page 548

Chapter 9: TDM Services and Interfaces
Figure 317 Pseudowire Service Creation – Interface #2 (Radio/Cascading)
6 Follow the instructions in Steps 2-4 to configure the second endpoint.
7 Click Next. The EC ID page opens.
Figure 318 Pseudowire Service Creation – Service Selection Page (Radio/Ethernet/Cascading)
8 Select an EC ID (1-512) to identify the service. Only unused EC ID values appear in the EC ID selection box.
The default value is the lowest unused EC ID.
9 In the P-bit field, select a p-bit value (0-7). This value will be assigned to frames passing through the service.
10 Optionally, in the Description field, enter text to describe the service.
11 Click Finish. The Selection Summary page opens, displaying the parameters you have configured.
phn-3965_006v002
Page 9-40
Configuring TDM Pseudowire Services