Cambium Networks PTP 820 Series User Manual page 688

Chapter 12: Alarm Management and Troubleshooting
Parameter
RMEP Last rx CCM Chassis
ID Format
RMEP Last rx CCM Chassis
ID
Displaying Last Invalid CCMS
To display the entire frame of the last CCM error message and the last CCM cross-connect error message received
by a specific local MEP:
1. Select Ethernet > Protocols > SOAM > MEP. The SOAM MEP page opens
2. Select a MEP and click Last Invalid CCMS. The MEP Last Invalid CCMS page opens.
Figure 423 MEP Last Invalid CCMS Page
The Last RX error CCM message field displays the frame of the last CCM error message received by the MEP.
The Last RX Xcon fault message field displays the frame of the last CCM cross-connect error message received by
the MEP.
Note
A cross-connect error occurs when a CCM is received from a remote MEP that has not been defined
locally.
Definition
Displays the format of the remote chassis (always the MAC address).
Displays the MAC address of the remote chassis.
phn-3965_006v002
Page 12-38
Performing Diagnostics
(Figure 417).