Chapter 11: Access Management and Security
23
Click OK.
The following figure shows the Attributes table for the Radius_Advanced group, where access to the device is
allowed from all channels.
Figure 382 Create Network Policy – Example of Vendor-Specific Attribute Configuration
24
Close all opened windows and click Next.
25
In the Completing New Network Policy window, click Finish.
26
Reset the Network Policy Server (NPS) by stopping and starting the NPS service as follows:
i
Right click the NPS (Local) node, and select Stop NPS Service.
ii
Right click the NPS (Local) node, and select Start NPS Service.
phn-3965_006v002
Page 11-30
Configuring RADIUS