Cambium Networks PTP 820 Series User Manual page 923

Chapter 19: Quality of Service (QoS) (CLI)
Parameter Input Type
service- Number
bundle-id
clear-on-read Boolean
layer-1 Boolean
The following command displays service bundle PMs for Service Bundle 1, on GbE 1. The PMs are cleared after
they are displayed.
eth type eth [1/1]> tm-service-bundle show statistics service-bundle-id 1
clear-on-read yes layer-1 yes
Permitted Values Description
1 – 63 The service bundle for which you want to
display PMs.
Note: In the
current release,
only Service Bundle
1 is supported.
yes If you enter yes, the statistics are cleared
once you display them.
no
yes – Statistics are represented as Layer 1
yes
statistics, including preamble and IFG.
no
– Statistics are represented as Layer 2
no
statistics.
phn-3965_006v002
Page 19-56
Displaying Egress Statistics (CLI)