Cambium Networks PTP 820 Series User Manual page 910

Chapter 19: Quality of Service (QoS) (CLI)
Parameter
Input Type
cos5-priority Number
cos6-priority Number
cos7-priority Number
The following command configures a priority profile with Profile ID 1.
root> ethernet qos port-priority-profile-tbl add profile-id 1 cos0-
priority 1 description c0_p1 cos1-priority 1 description c1_p1 cos2-
priority 1 description c2_p1 cos3-priority 2 description c3_p2 cos4-
priority 2 description c4_p2 cos5-priority 3 description c5_p3 cos6-
priority 4 description c6_p4 cos7-priority 4 description c7_p4
This profile has the parameters listed in the following table.
Table 248 Interface Priority Sample Profile Parameters
CoS Green Priority
(user defined)
0 1
1 1
2 1
3 2
4 2
5 3
6 4
7 4
The following command edits the profile you created in the previous command so that CoS 6 queues have a Green
priority of 3 instead of 4, and a description of "c6_p3".
Permitted
Values Description
1-4 The Green priority for the CoS 5 queue, from 4
(highest) to 1 (lowest). This priority is applied to
Green frames with CoS 5 egressing the service
bundle to which the profile is assigned.
1-4 The Green priority for the CoS 6 queue, from 4
(highest) to 1 (lowest). This priority is applied to
Green frames with CoS 6 egressing the service
bundle to which the profile is assigned.
1-4 The Green priority for the CoS 7 queue, from 4
(highest) to 1 (lowest). This priority is applied to
Green frames with CoS 7 egressing the service
bundle to which the profile is assigned.
Yellow Priority Description
(read only)
1 c0_p1
1 c1_p1
1 c2_p1
1 c3_p2
1 c4_p2
1 c5_p3
1 c6_p4
4 c7_p4
phn-3965_006v002
Page 19-43
Configuring Scheduling (CLI)