Cambium Networks PTP 820 Series User Manual page 638

Chapter 11: Access Management and Security
1 In the
/etc/raddb/clients.conf
The example shows how to add PTP 820G device with IP address 192.168.1.118:
# IP20-G
client 192.168.1.118 {
}
Keep in mind:
o
The must be between 22 and 128 characters long. Note down the secret because you will need to
secret
enter the same value in the Secret field of the Radius Configuration – Edit page
o
The is not mandatory, but should be added, and should be different for each RADIUS client.
shortname
2 Save the changes to the
Step 4 – Restarting the RADIUS client
After configuring all of the above, restart the RADIUS process.
To restart the RADIUS process:
1 Stop the process by entering:
killall -9 radiusd
2 Start the process running in the background by entering:
radius –X &
Note
To check the logs each time a user connects to the server, enter:
radius –X &
file, add the device according to the following example.
secret = default_not_applicable
shortname = cambium-PTP 820G
/etc/raddb/clients.conf
.
phn-3965_006v002
Page 11-34
(Figure
file.
Configuring RADIUS
364).