Cambium Networks PTP 820 Series User Manual page 639

Chapter 11: Access Management and Security
Configuring X.509 CSR Certificates and HTTPS
The web interface protocol for accessing PTP 820G or PTP 820F can be configured to HTTP (default) or HTTPS. It
cannot be set to both at the same time.
Before setting the protocol to HTTPS, you must:
1. Create and upload a CSR file. See
2. Download the certificate to the PTP 820G or PTP 820F and install the certificate. See
Certificate.
3. Enable HTTPS. This must be performed via CLI. See
When uploading a CSR and downloading a certificate, the PTP 820G or PTP 820F functions as an SFTP client. You
must install SFTP server software on the PC or laptop you are using to perform the upload or download. For
details, see Configuring the Internal Ports for FTP or
Note
For these operations, SFTP must be used.
Generating a Certificate Signing Request (CSR) File
To generate a Certificate Signing Request (CSR) file:
1. Select Platform > Security > X.509 Certificate > CSR. The Security Certificate Request page opens.
Generating a Certificate Signing Request (CSR)
Enabling HTTPS
SFTP.
phn-3965_006v002
Page 11-35
Configuring X.509 CSR Certificates and HTTPS
File.
Downloading a
(CLI).