Chapter 3: Configuration Guide
•
If you selected Adaptive in the Operational Mode field, the following two fields are displayed:
o
Maximum profile – Enter the maximum profile for the script. See
o
To view
and configure radio parameters, you must first enter the radio's view level in the CLI.
Use the following command to enter a radio's view level:
root> radio slot <slot> port <port>
The following command enters radio view for fixed radio interface 1:
root> radio slot 1 port 1
The following prompt appears:
radio[1/1]>
The following command enters radio view for fixed radio interface 2:
root> radio slot 1 port 2
The following prompt appears:
radio[1/2]>
The following command enters radio view for an RMC in expansion slot 3:
root> radio slot 3 port 1
The following prompt appears:
radio[3/1]>
Configuring a Link Using the Quick Configuration Wizard
Entering Radio View (CLI)
phn-3965_006v002
Page 3-12