Chapter 14: Getting Started (CLI)
Entering Radio View (CLI)
To view and configure radio parameters, you must first enter the radio's view level in the CLI.
To enter a radio's view level, enter the following command in root view:
root> radio slot <slot> port <port>
The following command enters radio view for radio interface 1:
root> radio slot 1 port 1
The following prompt appears:
radio[1/1]>
The following command enters radio view for radio interface 2:
root> radio slot 1 port 2
The following prompt appears:
radio[1/2]>
phn-3965_006v002
Page 14-25
Entering Radio View (CLI)