Chapter 3: Configuration Guide
Figure 111 Create XPIC Group Finish Page
8.
To create the group with the parameters displayed, click Submit. To go back and change any of the
parameters, click Back. If the XPIC group is successfully created, a confirmation page opens.
After you create an XPIC group, you must enable the group. To enable an XPIC group:
1.
Select the XPIC group in the XPIC table.
Figure 112 XPIC Page (Populated)
2.
Click Edit. The XPIC Groups - Edit page opens.
phn-3965_006v002
Page 3-102
Configuring XPIC