Cambium Networks PTP 820 Series User Manual page 757

Chapter 15: Configuration Guide (CLI)
root> radio protection revertive group 1 admin enable primary-radio-slot
1 primary-radio-port 1
To configure revertive mode for space diversity, enter the following command in root view:
root> radio protection set revertive-space-div <enable|disable> group
<group>
The following command enables diversity revertive mode for protection group 1:
root> radio protection set revertive-space-div enable group 1
Table 146 HSB Revertive Mode CLI Parameters
Parameter Input Type
group Number
radio Number
port Number
Switchovers and Lockout (CLI)
The following events trigger switchover for 1+1 HSB protection according to their priority, with the highest priority
triggers listed first.
1 Card missing
2 Lockout
3 Force switch
4 Traffic failures
5 Manual switch
To perform a manual switchover, use the following command:
root> radio protection manual-switch group <group#>
For example, to perform a manual switchover on group 1, use the following command:
root> radio protection manual-switch group 1
To perform a force switchover, use the following command:
root> radio protection force-switch group <group#>
For example, to perform a force switchover on group 1, use the following command:
root>radio protection force-switch group 1
To perform a lockout of a protection group, use the following command:
root> radio protection lock group <group#>
For example, to perform a lockout on group 1, use the following command:
root>radio protection lock group 1
To unlock a protection group that is in lockout mode, use the following command:
root> radio protection unlock group <group#>
Permitted Values Description
1-4 The group ID of the protection group.
1
1-2
phn-3965_006v002
Page 15-26
Configuring HSB Radio Protection (CLI)