Cambium Networks PTP 820 Series User Manual page 949

Chapter 20: Ethernet Protocols (CLI)
Parameter Input Type
group Variable
msti-port- Number
priority
msti-port- Number
path-cost
The following command sets the MSTI port priority for MSTI 14 on Ethernet port 2 to 192:
root> ethernet mstp set instance 14 interface eth slot 1 port 2 msti-
port-priority 192
The following command sets the MSTI port priority for MSTI 14 on LAG 1 to 192:
root> ethernet mstp set instance 14 group lag1 msti-port-priority 192
The following command sets the MSTI path cost for MSTI 12 on Ethernet port 3 to 20000:
root> ethernet mstp set instance 12 interface eth slot 1 port 3 msti-
port-path-cost 20000
The following command sets the MSTI path cost for MSTI 12 on HSB protection group 1 to 20000:
root> ethernet mstp set instance 12 group rp1 msti-port-path-cost 20000
The following command displays the MSTI parameters for MSTI 10 and radio interface 1:
root> ethernet mstp show-msti-port-attributes instance 10 interface radio
slot 1 port 1
The following command displays the MSTI parameters for MSTI 10 and LAG 1:
root> ethernet mstp show-msti-port-attributes instance 10 group lag1
Viewing and Resetting Port BPDU Counters (CLI)
To view the BPDU counters for a port, enter the following command in root view:
Permitted Values Description
rp1 To configure or display parameters for a
rp2 LAG group, or a Multi-Carrier ABC group,
rp3 use this parameter instead of the interface,
rp4 slot, and port parameters to identify the
lag1 group. See:
lag2
•
Configuring HSB Radio Protection (CLI)
lag3
•
Configuring Link Aggregation (LAG) and
lag4
LACP
mc-abc1
•
Configuring Multi-Carrier ABC (CLI)
mc-abc2
mc-abc3
mc-abc4
0-240, in multiples The priority contained in the first octet of
of 16. the two-octet Port ID.
1-200000000. The port's Path Cost parameter for the
MSTI.
Note:
parameter may cause re-initialization of the
MSTI for which the parameter is changed.
No other MSTI should be affected.
phn-3965_006v002
Page 20-26
(CLI)
Changing the value of this
Configuring MSTP (CLI)