Cambium Networks PTP 820 Series User Manual page 876

Chapter 19: Quality of Service (QoS) (CLI)
Parameter Input Type
ip-dscp Variable
The following command enables DSCP trust mode for GbE 1:
eth type eth [1/1]>classification set ip-dscp trust
The following command disables DSCP trust mode for GbE 1:
eth type eth [1/1]>classification set ip-dscp un-trust
Modifying the DSCP Classification Table (CLI)
The following table shows the default values for the DSCP classification table.
Table 221 DSCP Classification Table Default Values
DSCP DSCP (bin)
0 (default) 000000
10 001010
12 001100
14 001110
18 010010
20 010100
22 010110
26 011010
28 011100
30 011110
34 100010
36 100100
38 100110
Permitted Values Description
trust Select the interface's trust mode for DSCP
classification:
un-trust
trust
classification according to a user-configurable
table for DSCP to CoS and color classification.
DSCP classification has priority over MPLS
classification, so that if a match is found with the
DSCP value of the ingressing frame, MPLS bits are
not considered.
un-trust
DSCP during classification.
Description CoS (Configurable)
BE (CS0) 0
AF11 1
AF12 1
AF13 1
AF21 2
AF22 2
AF23 2
AF31 3
AF32 3
AF33 3
AF41 4
AF42 4
AF43 4
phn-3965_006v002
Page 19-9
Configuring Classification (CLI)
– The interface performs QoS and color
– The interface does not consider
Color (Configurable)
Green
Green
Yellow
Yellow
Green
Yellow
Yellow
Green
Yellow
Yellow
Green
Yellow
Yellow