Cambium Networks PTP 820 Series User Manual page 632

Chapter 11: Access Management and Security
i Select Enter Vendor Code.
ii Enter 2281 in the Enter Vendor Code field.
iii Select the option Yes. It conforms.
iv Click Configure Attribute.
Figure 380 Create Network Policy – Specifying the Vendor
22 In the Configure VSA (RFC Compliant) window that appears, configure 13 attributes as follows:
i For Vendor-assigned attribute number from 21 till 32, select Decimal in the Attribute format field.
These twelve attributes define the Read access level (None, Regular, or Advanced), and the Write access
level (None, Regular, or Advanced) for each of the six functional groups (Ethernet, Management, Radio,
Security, Sync, TDM). Therefore, in the Attribute value field enter the value corresponding to the access
level you wish to permit to members of the group whose policy you are configuring, where:
2 = Advanced
1 = Regular
0 = None
Thus for example, enter 2 for all twelve attributes if you are configuring a policy for the Radius_Advanced
group. This gives Advanced read permissions and Advanced write permissions, for all six functional groups, to
the members of the Radius_Advanced group.
phn-3965_006v002
Page 11-28
Configuring RADIUS