Chapter 7: Quality of Service (QoS)
Assigning WRED Profiles to Queues
To assign a WRED profile to a queue:
1.
Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces page opens
2.
Select an interface in the Ethernet Logical Port Configuration table and click WRED. The WRED page opens.
Figure 236 Logical Interfaces – WRED Page
3.
In the Show Service bundle ID field, select 1.
Note
Service Bundles are bundles of queues, grouped together in order to configure common egress
characteristics for specific services. In the current release, only Service Bundle 1 is supported.
4.
Select a CoS Queue ID and click Edit. The Logical Interfaces – WRED – Edit page opens.
Figure 237 Logical Interfaces – WRED - Edit Page
5.
In the Profile ID field, select the WRED profile you want to assign to the selected queue.
6.
Click Apply, then Close.
phn-3965_006v002
Page 7-27
Configuring WRED
(Figure
214).