Cambium Networks PTP 820 Series User Manual page 832

Chapter 18: Ethernet Services and Interfaces (CLI)
SP Type
SP Attached
Type Interface Type
SAP 802.1q
Bundle-C
Bundle-S
All to One
Q in Q
SNP 802.1q
S-Tag
Pipe 802.1q
S-Tag
MNG 802.1q
Q in Q
S-Tag
Adding a Service Point (CLI)
The command syntax for adding a service point depends on the interface type of the service point. The interface
type determines which frames enter the service via this service point.
To add a service point with an All-to-One interface type, go to service view for the service and enter the following
command:
service[SID]>sp add sp-type <sp-type> int-type all-to-one spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> sp-name <sp-
name>
To add a service point with a Dot1q interface type, go to service view for the service and enter the following
command:
service[SID]>sp add sp-type <sp-type> int-type dot1q spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> vlan <vlan>
sp-name <sp-name>
Pipe
802.1q S-Tag
No No
No No
No No
No No
No No
No No
No No
Only one No
Pipe SP
Allowed
Only one
No
Pipe SP
Allowed
Yes No
No No
No Yes
phn-3965_006v002
Page 18-13
Configuring Ethernet Services (CLI)
MNG
802.1q Q in Q
Yes No
Yes No
No Yes
No No
No Yes
Yes No
No No
Yes No
No No
Only 1 MNG No
SP Allowed
No Only 1 MNG
SP Allowed
No No
S-Tag
No
No
No
No
No
No
Yes
No
Yes
No
No
Only 1 MNG
SP Allowed