Chapter 15: Configuration Guide (CLI)
Configuring a 1+0 Link (CLI)
To configure a 1+0 link, you must perform the following steps:
1
Unmute the radio. See
2
Configure the radio's TX level. See
3
Configure the radio's frequency. See
4
Configure the radio's MRMC script. See
Unmuting a Radio
(CLI).
Configuring the Transmit (TX) Level
Configuring the Transmit (TX) Frequency
Configuring the Radio (MRMC) Script(s)
phn-3965_006v002
Page 15-4
Configuring a 1+0 Link (CLI)
(CLI).
(CLI).
(CLI).