Cambium Networks PTP 820 Series User Manual page 966

Chapter 21: TDM Services and Interfaces (CLI)
root> pwe3
pwe3>
pwe3> pwe3 tdm config modify port slot <slot> tdm-port <tdm-port> line-
type <line-type> line-coding <line-coding> channelization
<channelization> timing-mode <timing-mode> clk-src-ref <clk-src-ref> clk-
src-ref-port <clk-src-ref-port> idle-code <idle-code> cable-length
<cable-length>
pwe3> pwe3 tdm enable slot <slot> tdm-port <tdm-port>
Table 279 E1/DS1 Configuration CLI Parameters
Parameter Input Type
slot Number
tdm-port Number
line-type Variable
line-coding Variable
channelization Variable
Permitted Values Description
For TDM cards in an
expansion slot: 2-3
For the fixed E1/DS1
interface: 1
•
The physical port number of the port.
The fixed E1/DS1
interface or an LIC-
T16 (16 x E1/DS1):
1-16
•
If the card is an
LIC-T155 (1x ch-
STM-1/OC-3):
•
STM-1: 1-63
•
OC-3: 1-84
unframed The line type of this port. In this release, unframed
is the only available option.
hdb3-b8zs The line coding for this port. Options are:
ami
hdb3-b8zs
DS1.
ami
disable Channelization is only relevant for CESoP mode,
which is planned for future release.
phn-3965_006v002
Page 21-5
Configuring TDM Cards and Interfaces (CLI)
– hdb3 coding for E1, b8zs coding for
– Only relevant for DS1 ports.