Chapter 9: TDM Services and Interfaces
3
Click Next. The Interface #2 page opens. In the Interface #2 page, configure the parameters of the service's
second endpoint:
o
If the first endpoint is a TDM interface, select a radio interface, a Radio Protection group, a Multi-Carrier
ABC group, or an Ethernet or cascading interface in the Interface #2 page.
o
If the first endpoint is a radio interface, a Radio Protection group, a Multi-Carrier ABC group, or an
Ethernet or cascading interface, select a TDM interface in the Interface #2 page.
4
Follow the instructions in
5
Click Next. The EC ID Selection page opens.
Step 2
to configure the second endpoint.
phn-3965_006v002
Page 9-34
Configuring TDM Pseudowire Services