Cambium Networks PTP 820 Series User Manual page 786

Chapter 16: Unit Management (CLI)
Configuring Unit Parameters (CLI)
To configure a name for the unit, enter the following command in root view:
root> platform management system-name set name <name>
For example:
root> platform management system-name set name "My-System-Name"
To define a location for the unit, enter the following command in root view:
root> platform management system-location set name <name>
For example:
root> platform management system-location set name "My System Location"
To define a contact person for questions pertaining to the unit, enter the following command in root view:
root> platform management system-contact set name <name>
For example:
root> platform management system-contact set name "John Doe"
To define the unit's latitude coordinates, enter the following command in root view:
root> platform management system-latitude set <latitude>
For example:
root> platform management system-latitude set 40
To define the unit's longitude coordinates, enter the following command in root view:
root> platform management system-longitude set <longitude>
For example:
root> platform management system-longitude set 73
To define the type of measurement unit you want the system to use, enter the following command in root view:
root> platform management set unit_measure_format <unit_measure_format>
For example:
root> platform management set unit_measure_format metric
To display the type of measurement unit used by the system, enter the following command in root view:
root> platform management show unit_measure_format
To display the unit parameters, including current temperature and input voltage:
root> platform management unit-status
phn-3965_006v002
Page 16-28
Configuring Unit Parameters (CLI)