Cambium Networks PTP 820 Series User Manual page 410

Chapter 6: Ethernet Services and Interfaces
Enabling or Disabling Gathering of Port RX PM Statistics per Interface
To select the interfaces for which to gather and display Port RX PMs:
1. In the Ethernet Port RX PM Report page, click PM Admin. The Ethernet PM Port Admin page opens.
Figure 211 Ethernet PM Port Admin Page
2. Select the interface.
3. Click Enable Port PM or Disable Port PM to enable or disable the gathering of Port RX PMs on the selected
interface.
4. Click Close.
Setting the Ethernet Port RX Threshold
The RX bytes Layer 1 exceed threshold (sec) column shows for each interval, the number of seconds the RX bytes
exceeded the specified threshold during the interval:
To view and set this threshold:
1. In the Ethernet Port RX PM Report page, click Threshold. The Ethernet Port Rx Threshold page opens.
Figure 212 Ethernet Port Rx Threshold Page
phn-3965_006v002
Page 6-39
Viewing Ethernet PMs and Statistics