Cambium Networks PTP 820 Series User Manual page 854

Chapter 18: Ethernet Services and Interfaces (CLI)
Table 203 Entering Interface View CLI Parameters
Parameter Input Type
slot Number
port Number
For example, the following command enters interface view for Ethernet port 3:
root> ethernet interfaces eth slot 1 port 3
The following prompt appears:
eth type eth [1/3]>
The exact prompt depends on the type of interface. For example:
•
Radio interface: eth type radio [x/x]>
•
Group interface (e.g., 1+1 HSB-SD group):
•
TDM interface: eth type pwe [x/x]>
For simplicity, the examples in the following sections show the prompt for an Ethernet interface.
Displaying the Operational State of the Interfaces in the Unit
(CLI)
To display a list of all interfaces in the unit and their operational states, enter the following command:
root> platform if-manager show interfaces
The following is a sample output of this command:
Permitted Values Description
1
ethernet: 1-6 The port number of the interface.
radio: 1-2
management: 1-2
tdm: 1
eth type group [x/x]
phn-3965_006v002
Page 18-35
Configuring Ethernet Interfaces (CLI)