Cambium Networks PTP 820 Series User Manual page 514

Chapter 9: TDM Services and Interfaces
Parameter
Line Coding
Signal Channelization
Idle Code
Cable Length
Table 99 E1/DS1 Interface Parameters
Parameter
Shelf Slot ID
Port Number
Operational State
Line Alarms
Loopback State
Definition
Select the line coding for this port. Options are:
•
hdb3-b8zs – hdb3 coding for E1, b8zs coding for DS1.
•
AMI – Only relevant for DS1 ports.
Select Disable.
Note: Channelization is only relevant for CESoP mode, which is planned
for future release.
Enter the value to be transmitted on this port for unused time slots (0-
255).
Reserved for future use.
Definition
Slot 1.
The physical port number of the port on the TDM card.
Indicates whether the port is currently operational (Up) or non-
operational (Down).
The number of line-level PDH alarms currently present on the port.
The actual status of loopback on this port, as reported by the TDM card.
phn-3965_006v002
Page 9-6
Configuring the E1/DS1 Interface