Cambium Networks PTP 820 Series User Manual page 819

Chapter 17: Radio Configuration (CLI)
radio [1/1]>modem pm-xpi show interval 24hr
Modem XPI PM Table:
===================
Interval Integrity Min XPI (dB) Max XPI (dB) XPI below
threshold
seconds
=============================================================================
===
0 1 55.00 0.00 0
1 1 55.00 0.00 0
2 1 55.00 0.00 0
3 1 55.00 0.00 0
4 1 55.00 0.00 0
5 1 55.00 0.00 0
6 1 55.00 0.00 0
7 1 55.00 0.00 0
8 1 0.00 0.00 38802
9 1 0.00 0.00 48647
10 1 0.00 0.00 9665
11 1 0.00 0.00 1605
12 1 55.00 0.00 0
radio [1/1]>
Table 174 XPI PMs (CLI)
Parameter
Interval
Integrity
Min XPI (dB)
Max XPI (dB)
XPI Below Threshold
Seconds
Description
The number of the interval: 1-30 for daily PM reports, and 1-96 for 15
minute PM reports.
Indicates whether the values received at the time and date of the
measured interval are reliable. "1" in the column indicates that the
values are not reliable due to a possible power surge or power failure
that occurred at that time.
Indicates the lowest XPI value in dB, measured during the interval.
Indicates the highest XPI value in dB, measured during the interval.
Indicates the number of seconds the XPI value was lower than the XPI
threshold during the interval.
phn-3965_006v002
Page 17-30
Configuring and Viewing Radio PMs and Statistics (CLI)