Cambium Networks PTP 820 Series User Manual page 885

Chapter 19: Quality of Service (QoS) (CLI)
Assigning a Rate Meter (Policer) for Multicast Traffic (CLI)
To assign a rate meter (policer) profile for multicast traffic to the interface, go to interface view for the interface
and enter the following command:
eth type eth [x/x]>rate-meter multicast add capability admin-state
<admin-state> profile-id <profile-id>
To change the rate meter (policer) profile for multicast traffic, go to interface view for the interface and enter the
following command:
eth type eth [x/x]>rate-meter multicast edit admin-state <admin-state>
profile-id <profile-id>
To display the current multicast rate meter (policer) profile for an interface, go to interface view for the interface
and enter the following command:
eth type eth [x/x]>rate-meter multicast show configuration
To delete the rate meter (policer) profile for multicast traffic, go to interface view for the interface and enter the
following command:
eth type eth [x/x]>rate-meter multicast delete
Table 229 Assigning Rate Meter for Multicast Traffic CLI Parameters
Parameter Input Type
admin-state Variable
profile-id Number
The following command assigns Rate Meter Profile 1 to multicast traffic on GbE 1, and enables rate metering on
the port.
eth type eth [1/1]>rate-meter multicast add capability admin-state enable
profile-id 1
The following command changes the rate meter (policer) profile for multicast traffic on GbE 1 to 4:
eth type eth [1/1]>rate-meter multicast edit admin-state enable profile-
id 4
Assigning a Rate Meter (Policer) for Broadcast Traffic (CLI)
To assign a rate meter (policer) profile for broadcast traffic to the interface, go to interface view for the interface
and enter the following command:
eth type eth [x/x]>rate-meter broadcast add capability admin-state
<admin-state> profile-id <profile-id>
To change the rate meter (policer) profile for broadcast traffic, go to interface view for the interface and enter the
following command:
Permitted Values Description
enable Enables or disables rate metering on
multicast traffic flows from the logical
disable
interface.
1 – 250 Select from the rate meter profiles
defined in the system.
phn-3965_006v002
Page 19-18
Configuring Policers (Rate Metering) (CLI)