Cambium Networks PTP 820 Series User Manual page 722

Chapter 14: Getting Started (CLI)
Configuring the Transmit (TX) Level (CLI)
To set the transmit (TX) level of a radio, go to radio view and enter the following command:
radio[x/x]>rf set tx-level <tx-level>
To display the maximum transmit (TX) level of a radio, go to radio view and enter the following command:
radio[x/x]>rf show max-tx-level
Table 134 Radio Transmit (TX) Level CLI Parameters
Parameter Input Type
tx-level Number
The following command sets the TX level of radio interface 1 to 10 dBm:
radio[2/1]>rf set tx-level 10
Permitted Values
PTP 820G units: -1 to 22
phn-3965_006v002
Page 14-27
Configuring the Transmit (TX) Level (CLI)
Description
The desired TX signal level
(TSL), in dBm.