Cambium Networks PTP 820 Series User Manual page 834

Chapter 18: Ethernet Services and Interfaces (CLI)
Parameter Input Type
int-type Variable
sp-id Number
interface Variable
Permitted Values Description
all-to-one Determines which frames enter the service via this
dot1q service point, based on the frame's VLAN tagging.
s-tag Since more than one service point may be
bundle-c-tag associated with a single interface, frames are
bundle-s-tag assigned to the earliest defined service point in
qinq case of conflict.
all-to-one
that enter the interface are classified to the service
point. Only valid for SAP service point types.
dot1q
point. Valid for all service point types.
s-tag
point. Valid for SNP and MNG service point types.
bundle-c-tag
classified to the service point. Only valid for SAP
service point types.
bundle-s-tag
multiple C-VLANs are classified to the service point.
Only valid for SAP service point types.
qinq
classified to the service point. Valid for SAP and
MNG service point types.
1-32 for P2P and This ID is unique within the service.
MP services.
1-30 for MNG
services.
eth The Interface type for the service point:
pwe
– An Ethernet interface.
eth
radio
– A TDM interface.
pwe
radio
When you are defining the service point on a
group, such as a 1+1 HSB group or a LAG group,
use the group parameter instead of the interface
parameter.
phn-3965_006v002
Page 18-15
Configuring Ethernet Services (CLI)
– All C-VLANs and untagged frames
– A single C-VLAN is classified to the service
– A single S- VLAN is classified to the service
– A set of multiple C-VLANs is
– A single S-VLAN and a set of
– A single S-VLAN and C-VLAN combination is
– A radio interface.