Cambium Networks PTP 820 Series User Manual page 86

Chapter 1: Introduction
Paramet
er
tx-level
The following command sets the TX level of fixed radio interface 1 to 10 dBm:
Configuring the Radio (MRMC) Script(s)
MRMC > Displaying MRMC Status
MRMC Status
PM & Statistics Displaying Defective Block Counters
> Counters
PM & Statistics Displaying Signal Level PMs and Configuring Signal Level PM Thresholds
> Signal Level
PM & Statistics Displaying PMs for the Combined IF Combining Signal
> Combined
PM & Statistics Displaying Modem BER (Aggregate) PMs
> Aggregate
PM & Statistics Displaying MSE PMs and Configuring MSE PM Thresholds
> MSE
PM & Statistics Displaying XPI PMs and configuring XPI PM Thresholds
> XPI
PM & Statistics Displaying MRMC PMs
> MRMC
PM & Statistics Displaying Capacity and Throughput PMs
> Traffic >
Capacity/Thro
ughput
PM & Statistics
Displaying Utilization PMs
> Traffic >
Utilization
PM & Statistics Displaying Frame Error Rate PMs
> Traffic >
radio[x/x]>rf show max-tx-level
Table: Transmit (TX) Level CLI Parameters
Input Permitted
Ty Values
p
e
Number -50-34
radio[1/1]>rf set tx-level 10
phn-3965_006v002
Page 1-40
Reference Guide to Web EMS Menu Structure
Description
The desired TX signal level (TSL), in
dBm.