Cambium Networks PTP 820 Series User Manual page 886

Chapter 19: Quality of Service (QoS) (CLI)
eth type eth [x/x]>rate-meter broadcast edit admin-state <admin-state>
profile-id <profile-id>
To display the current broadcast rate meter (policer) settings for an interface, go to interface view for the interface
and enter the following command:
eth type eth [x/x]>rate-meter broadcast show configuration
To delete the rate meter (policer) profile for broadcast traffic, go to interface view for the interface and enter the
following command:
eth type eth [x/x]>rate-meter broadcast delete
Table 230 Assigning Rate Meter for Broadcast Traffic CLI Parameters
Parameter Input Type
admin-state Variable
profile-id Number
The following command assigns Profile 1 to broadcast traffic on GbE 1, and enables rate metering on the port.
eth type eth [1/1]>rate-meter broadcast add capability admin-state enable
profile-id 1
The following command changes the rate meter (policer) profile for broadcast traffic on GbE 1 to 4:
eth type eth [1/1]>rate-meter broadcast edit admin-state enable profile-
id 4
Assigning a Rate Meter (Policer) per Ethertype (CLI)
You can define up to three policers per Ethertype value.
To assign a rate meter (policer) profile for a specific Ethertype to an interface, go to interface view for the interface
and enter the following command:
eth type eth [x/x]>rate-meter <ethertype#> add capability ethertype-value
<ethertype-value> admin-state <admin-state> profile-id <profile-id>
To change the rate meter (policer) profile for a specific Ethertype, go to interface view for the interface and enter
the following command:
eth type eth [x/x]>rate-meter <ethertype#> edit ethertype-value
<ethertype-value> admin-state <admin-state> profile-id <profile-id>
To display the current Ethertype rate meter (policer) settings for an interface, go to interface view for the interface
and enter the following commands:
eth type eth [x/x]>rate-meter ethertype1 show configuration
eth type eth [x/x]>rate-meter ethertype2 show configuration
eth type eth [x/x]>rate-meter ethertype3 show configuration
Permitted Values Description
enable Enables or disables rate metering on
broadcast traffic flows from the logical
disable
interface.
1 – 250 Select from the rate meter profiles
defined in the system.
phn-3965_006v002
Page 19-19
Configuring Policers (Rate Metering) (CLI)