Cambium Networks PTP 820 Series User Manual page 772

Chapter 16: Unit Management (CLI)
Table 150 Software Download CLI Parameters
Parameter Input Type
Dotted
server-ipv4
decimal
format.
server-ipv6 Eight groups
of four
hexadecimal
digits
separated by
colons.
server-ip Dotted
decimal
format.
directory Text String
username Text String
The following command configures a download from IP address 192.168.1.242, in the directory "current", with
user name "anonymous" and password "12345."
root> platform software download channel server set server-
ip 192.168.1.242 directory \current username anonymous password 12345
Downloading a Software Package (CLI)
To initiate a software download, enter the following command in root view:
root> platform software download version protocol ftp
The following prompt appears:
You are about to perform a software management operation. This may cause
a system reset.
Are you sure? (yes/no)
Enter at the prompt. When the prompt appears again, enter the following command to check the download
Yes
status:
root> platform software download status show
Once the following message appears, proceed with the installation:
DOWNLOAD VERSION status: download success, process percentage: 100
Permitted Values
Any valid IPv4 address.
Any valid IPv6 address.
Any valid IP address.
phn-3965_006v002
Page 16-14
Upgrading the Software (CLI)
Description
The IPv4 address of the PC or laptop
you are using as the FTP server.
The IPv6 address of the PC or laptop
you are using as the FTP server.
The IP address of the PC or laptop you
are using as the FTP server.
The directory path from which you are
downloading the files. Enter the path
relative to the FTP user's home
directory, not the absolute path. To
leave the path blank, enter //.
The user name for the FTP session.