Chapter 20: Ethernet Protocols (CLI)
Parameter
RX R-APS Frames
RX Invalid R-APS Frames
RX R-APS SF
RX R-APS NR
TX R-APS RB
TX R-APS SD
TX R-APS FS
TX R-APS MS
TX R-APS Event
Description
The number of R-APS frames that have been received by the service
point.
The number of R-APS frames with an invalid format that have been
received by the service point.
The number of R-APS Signal Fail (SF) frames that have been received by
the service point.
The number of R-APS No Request (NR) frames that have been received by
the service point.
The number of R-APS RPL Blocked (RB) frames that have been
transmitted by the service point.
The number of R-APS Signal Degrade (SD) frames that have been
transmitted by the service point.
The number of R-APS Forced Switch (FS) frames that have been
transmitted by the service point.
The number of R-APS Manual Switch (MS) frames that have been
transmitted by the service point.
Reserved for future use.
phn-3965_006v002
Page 20-13
Configuring G.8032 (CLI)