Cambium Networks PTP 820 Series User Manual page 841

Chapter 18: Ethernet Services and Interfaces (CLI)
Configuring C-VLAN CoS Preservation (CLI)
To configure CoS preservation for C-VLAN-tagged frames, go to service view for the service and enter the following
command:
service[SID]>sp cvlan-cos-preservation-mode set spid <sp-id> mode <c-
vlan cos preservation mode>
Table 191 C-VLAN CoS Preservation Mode CLI Parameters
Parameter Input Type
sp-id Number
c-vlan cos Variable
preservation
mode
The following command enables C-VLAN CoS preservation for Service Point 1 on Service 37:
service[37]>sp cvlan-cos-preservation-mode set spid 1 mode enable
The following command disables C-VLAN CoS preservation for Service Point 1 on Service 37:
service[37]>sp cvlan-cos-preservation-mode set spid 1 mode disable
Configuring C-VLAN Preservation (CLI)
To configure VLAN preservation for C-VLAN-tagged frames, go to service view for the service and enter the
following command:
service[SID]>sp cvlan-preservation-mode set spid <sp-id> mode <c-
vlan preservation mode>
Permitted Values Description
1-32 for P2P and The Service Point ID.
MP services.
1-30 for MNG
services.
enable Select
disable the original C-VLAN CoS value is preserved or
restored for frames egressing the service point.
enable
egressing the service point is the same as the value
when the frame entered the service.
disable
egressing the service point is set at whatever value
might have been re-assigned by the interface,
service point, or service, or whatever value results
from marking (see
phn-3965_006v002
Page 18-22
Configuring Ethernet Services (CLI)
or to determine whether
enable disable
– the C-VLAN CoS value of frames
– the C-VLAN CoS value of frames
Configuring Marking (CLI)).