Chapter 8: Ethernet Protocols
Figure 268 MSTP Bridge MSTI – Edit Page
3
To view all the bridge parameters of an MSTI and/or configure its bridge priority, select the MSTI and click
Edit.
4
In the MSTI Bridge Priority field, enter the MSTI writeable portion of the Bridge ID. Possible values are 0-
61440, in steps of 4096.
5
Click Apply, then Close.
Table 80
lists and describes the status parameters in the MSTP Bridge MSTI page.
Table 80 MSTP Bridge MSTI Status Parameters
Parameter
MSTI Instance ID
MSTI Bridge Identifier
MSTI Designated Root
MSTI Root Cost
MSTI Root Port
MSTI Number of Topology
Changes
MSTI Topology Change in
Progress
Definition
The MSTI ID.
The Bridge ID for the MSTI.
The Bridge ID of the root bridge for the MSTI.
The path cost from the transmitting bridge to the root bridge for the
MSTI.
The root port for the MSTI.
The number of topology changes that the bridge has detected in the MSTI
since the last time the management entity was reset or initialized.
Indicates whether a topology change is currently in progress on any port
in the MSTI.
phn-3965_006v002
Page 8-25
Configuring MSTP