Cambium Networks PTP 820 Series User Manual page 579

Chapter 9: TDM Services and Interfaces
Displaying TDM PMs
This section includes:
•
Displaying E1/DS1 PMs
•
Displaying Native TDM Service PMs
•
Displaying Pseudowire Service PMs
Displaying E1/DS1 PMs
To display PMs for all E1/DS1s in the system:
1 Select TDM > PM & Statistics > E1/DS1. The E1/DS1 PM page opens.
Figure 338 E1/DS1 PM Page
2 In the Interface field, select the port for which you want to display PMs.
3 In the Interval Type field, select:
o
To display reports in 15-minute intervals, select 15 minutes.
o
To display reports in daily intervals, select 24 hours.
Table 111 describes the E1/DS1 PMs.
Table 111 E1/DS1 PMs
Parameter
ES
SES
UAS
Definition
Indicates the number of seconds during which errors occurred.
Indicates the number of seconds during which severe errors occurred.
Indicates the Unavailable Seconds value of the current interval. The value
can be between 0 and 900 seconds (15 minutes).
phn-3965_006v002
Page 9-71
Displaying TDM PMs