Chapter 8: Ethernet Protocols
Parameter
Capabilities Supported
Capabilities Enabled
Definition
A bitmap value used to identify which system capabilities are supported
on the local system, as included in TLVs transmitted by the LLDP agent.
The bitmap is defined by the following parameters:
0 – other
1 – repeater
2 – bridge
3 – wlanAccessPoint
4 – router
5 – telephone
6 – docsisCableDevice
7 – stationOnly
8 – cVLANComponent
9 – sVLANComponent
10 – twoPortMACRelay
A bitmap value used to identify which system capabilities are enabled on
the local system, as included in TLVs transmitted by the LLDP agent.
The bitmap is defined by the following parameters:
0 – other
1 – repeater
2 – bridge
3 – wlanAccessPoint
4 – router
5 – telephone
6 – docsisCableDevice
7 – stationOnly
8 – cVLANComponent
9 – sVLANComponent
10 – twoPortMACRelay
phn-3965_006v002
Page 8-47
Configuring LLDP