Chapter 6: Ethernet Services and Interfaces
Parameter
Service Bundle ID
Adding a Service Point
To add a service point:
1.
Select Ethernet > Services. The Ethernet Services page opens
2.
Select the relevant service in the Ethernet Services Configuration table.
3.
Click Service Points. The Ethernet Service Points page opens
4.
Select the relevant service point in the Ethernet Services Points – General SP Attributes table.
5.
Click Add. The Ethernet Service Points – Add page opens.
Definition
This can be used to assign one of the available service bundles from the
H-QoS hierarchy queues to the service point. This enables you to
personalize the QoS egress path. Permitted values are 1-63.
phn-3965_006v002
Page 6-16
Configuring Ethernet Service(s)
(Figure
189).
(Figure
192).