Cambium Networks PTP 820 Series User Manual page 791

Chapter 17: Radio Configuration (CLI)
Viewing the Radio Status and Settings (CLI)
To display the RFU status, enter the following command in radio view:
radio[x/x]>rf module status show
The following commands display the RFU status for radio interface 1:
root> radio slot 1 port 1
radio [7/1]>rf module status show
TX Frequency(KHz): 18186250
RX Frequency(KHz): 18723750
TX RX Frequency separation(KHz): 537500
TX Level(dBm): 15
RX Level(dBm): -99
IF Combiner Mode: main
IF Combiner RX Level Diversity(dBm): 0
IF Combiner RX Level Combined(dBm): 0
Mute Configuration: on
Mute status: on
Temperature(Celsius): 32
Temperature(Fahrenheit): 89
Communication status: up
RSL connector: main
SW running version: C2.16_B5
XPIC mode: disable
radio [1/1]>
To display the RFU capabilities, enter the following command in radio view:
radio[x/x]>rf module capabilities show
The following commands display the RFU capabilities for radio interface 1:
phn-3965_006v002
Page 17-2
Viewing the Radio Status and Settings (CLI)